• InfraWorks
  • Structural Bridge Design
‌

Bridge analysis

Learn how to run a line girder analysis and a refined analysis before sending the bridge to the Autodesk Structural Bridge Design software for a detailed analysis.

Type:

Course

Length:

15 min.

‌

Course overview

Analyze the Bridge in InfraWorks

Learn how to run a line girder analysis and a refined analysis before sending the bridge to the Autodesk Structural Bridge Design software for a detailed analysis.

Structural Bridge Design

Use Structural Bridge Design to load and analyze the bridge using grillage and finite element methods and justification of the girders with the design tools.

Course outline

15 min.

Analyze the Bridge in InfraWorks

A preliminary analysis can be done on the bridge inside InfraWorks to analyze line girders to make sure they satisfy the design requirements. Learn how to run a line girder analysis and a refined analysis before sending the bridge to the Autodesk Structural Bridge Design software for a detailed analysis.

A preliminary analysis can be done on the bridge inside InfraWorks to analyze line girders to make sure they satisfy the design requirements. Learn how to run a line girder analysis and a refined analysis before sending the bridge to the Autodesk Structural Bridge Design software for a detailed analysis.
 
This module takes approximately 15 minutes to complete. By the end, you should be able to:
  • Run a line girder analysis.
  • Run a refined analysis on the bridge in InfraWorks.

Module pre-requisites

This module requires user-level knowledge of InfraWorks and is focused on best practices and its industry applications. If you don't have experiences with this product, we recommend you to take foundational training using one of the resources below:

About the author

This module was created by Russ Nicloy, Civil Solutions Specialist.

Before you start

  • Please make sure you have the Infraworks software loaded.
  • If you have technical difficulties, please reach out to product support. 

‌

Related learning

Course
Introduction to bridge design
InfraWorks, Civil 3D, Revit, Structural Bridge Design
View
Module1 hr. 20 min.
Coaching: Introduction to: InfraWorks for road and highway design
InfraWorks
View
Course2 hr. 30 min.
Success Plan: Design Visualization for Civil Projects Maturity 1
InfraWorks, Navisworks Manage, 3ds Max
View
Course3 hr. 25 min.
Existing conditions modeling for civil projects
InfraWorks, ReCap, Civil 3D
View
Course30 min.
Conceptual bridge design
InfraWorks
View
Course3 hr.
Detailed bridge design
InfraWorks, Revit, Civil 3D
View
Course1 hr. 25 min.
Visualization and documentation of the bridge design
InfraWorks
View
Course1 hr.
Success Plan: Design Visualization for Civil Projects Maturity 2
Navisworks Manage, InfraWorks, 3ds Max
View
Course4 hr. 45 min.
Success Plan: Design Visualization for Civil Projects
Navisworks Manage, InfraWorks, 3ds Max
View
Course
Design visualization for civil projects
InfraWorks, Navisworks Manage, 3ds Max
View

Browse content with related tags