Having completed the design of a factory layout using Factory Design Utilities with AutoCAD and Inventor, this course will demonstrate the value of using ProModel and Process Simulator Autodesk Editions to help optimize your factory layout by coordinating manufacturing processes to reduce inefficiencies and achieve your required production throughput.
This course was developed using the following Autodesk University Class, which was created by Aaron Nelson, Keith Vadas, and Andrew Schild.
These downloadable resources will be used to complete modules in this course:
This module will demonstrate the importance of completing process simulation when designing a factory layout, as well as considering in which scenarios simulation can be most impactful.
Module outline
This module will demonstrate the importance of completing process simulation when designing a factory layout, as well as considering in which scenarios simulation can be most impactful.
This module takes approximately 7 minutes to complete. By the end of the module, you should be able to:
This module was developed using the following Autodesk University Class, which was created by Aaron Nelson, Keith Vadas, and Andrew Schild.
This module will provide an introduction on creating a factory layout simulation using Process Simulator, referencing Factory Design Utilities assets. With the simulation created, this module will also detail how to run the process simulation and review the results.
Module outline
This module will provide an introduction on creating a factory layout simulation using Process Simulator, referencing Factory Design Utilities assets. With the simulation created, this module will also detail how to run the process simulation and review the results.
This module takes approximately 10 minutes to complete. By the end of the module, you should be able to:
This module was developed using the following Autodesk University Class, which was created by Aaron Nelson, Keith Vadas, and Andrew Schild.
This content series will demonstrate how to create a process simulation for an existing factory layout using ProModel Simulation. These workflows help to bridge the gap between factory layouts designed using Factory Design Utilities in AutoCAD and Inventor and ProModel's powerful simulation capabilities.
Module outline
This content series will demonstrate how to create a process simulation for an existing factory layout using ProModel Simulation. These workflows help to bridge the gap between factory layouts designed using Factory Design Utilities in AutoCAD and Inventor and ProModel's powerful simulation capabilities.
This content series takes approximately 10 minutes to complete. By the end, you should be able to:
This content series was developed using the following Autodesk University Class, which was created by Aaron Nelson, Keith Vadas, and Andrew Schild.
This content series will illustrate how production performance insights can be gathered for an existing factory layout in ProModel and Process Simulator. It will also demonstrate how various layout scenarios can be evaluated to determine what changes have the greatest impact on efficiency and throughput.
Module outline
This content series will illustrate how production performance insights can be gathered for an existing factory layout in ProModel and Process Simulator. It will also demonstrate how various layout scenarios can be evaluated to determine what changes have the greatest impact on efficiency and throughput.
This content series takes approximately 9 minutes to complete. By the end, you should be able to:
This content series was developed using the following Autodesk University Class, which was created by Aaron Nelson, Keith Vadas, and Andrew Schild.
