• InfraWorks

Use Model Builder to Display the Site and Add GIS Data (for LearnOne)

Selecting the right site for a building can make a big difference in the cost of the project. Selecting a site with transportation access to it, enough space for ample parking, and appropriate building codes and zoning can determine if the project gets approved or not. In this module, you learn how to use Model Builder to display the site. Then, you learn how to connect GIS data to the InfraWorks model and run a proper GIS analysis before selecting the project site.


Module overview

Selecting the right site for a building can make a big difference in the cost of the project. Selecting a site with transportation access to it, enough space for ample parking, and appropriate building codes and zoning can determine if the project gets approved or not. In this module, you learn how to use Model Builder to display the site. Then, you learn how to connect GIS data to the InfraWorks model and run a proper GIS analysis before selecting the project site.

This module takes approximately 20 minutes to complete. By the end of the module, you should be able to:

  • Create a model within minutes using the InfraWorks Model Builder
  • Add data from GIS sources to the InfraWorks model
  • Analyze the model using Themes and Styles

Before you start

  • Please make sure you have the InfraWorks software loaded.
  • If you have technical difficulties, please reach out to product support
  • To collaborate with other industry professionals taking the module, or if you have questions or feedback during the module, please visit the InfraWorks Forum.

Module downloads

These downloadable resources will be used to complete units in this module:

Module outline

  • Introduction to Use Model Builder to Display the Site and Add GIS Data

Related learning

Module30 min.
Revit

View
Module20 min.
InfraWorks
Course50 min.
BIM Collaborate Pro, Revit
Module50 min.
Civil 3D
Module1 hr.
InfraWorks, Civil 3D
Module40 min.
Revit
Module30 min.
AutoCAD
Module30 min.
AutoCAD
Module20 min.
AutoCAD
Module40 min.