• Fusion

Drawing template in Fusion

Upoad and use templates to create drawings.


00:00

With Fusion 360, you can upload existing drawing templates

00:07

and use them to create technical drawings of your designs.

00:11

Even when using templates for drawings,

00:13

you can still customize the displayed projected views.

00:17

With a design open in the Design workspace,

00:19

from the Data Panel, select Upload.

00:22

Use the file browser to navigate to where you have the drawing template you wish to use saved.

00:28

Once the template is uploaded to your project, expand the Workspace Picker and select Drawing > From Design.

00:35

In the Create Drawing dialog, expand the Template drop-down and select Browse to locate your recently uploaded template file.

00:44

From the Select Template dialog, choose your template.

00:48

Back in the Create Drawing dialog, click OK.

00:51

A drawing opens with the default view already in place.

00:55

To create other views in the drawing, from the Create panel, select Projected View.

01:01

Then, in the drawing area, select the parent view.

01:04

Now, as you move your cursor around the drawing area,

01:07

different projected views of the design display.

01:10

Pick to place however many you wish in the drawing.

01:13

Click OK to finish placing projected views of the design.

Video transcript

00:00

With Fusion 360, you can upload existing drawing templates

00:07

and use them to create technical drawings of your designs.

00:11

Even when using templates for drawings,

00:13

you can still customize the displayed projected views.

00:17

With a design open in the Design workspace,

00:19

from the Data Panel, select Upload.

00:22

Use the file browser to navigate to where you have the drawing template you wish to use saved.

00:28

Once the template is uploaded to your project, expand the Workspace Picker and select Drawing > From Design.

00:35

In the Create Drawing dialog, expand the Template drop-down and select Browse to locate your recently uploaded template file.

00:44

From the Select Template dialog, choose your template.

00:48

Back in the Create Drawing dialog, click OK.

00:51

A drawing opens with the default view already in place.

00:55

To create other views in the drawing, from the Create panel, select Projected View.

01:01

Then, in the drawing area, select the parent view.

01:04

Now, as you move your cursor around the drawing area,

01:07

different projected views of the design display.

01:10

Pick to place however many you wish in the drawing.

01:13

Click OK to finish placing projected views of the design.

Was this information helpful?