Bridge Design Workflow

00:01

Okay, let's break down the last stop on our Bridge Design Workflow course.

00:06

This is the workflow to Revit.

00:09

So, if we started, the first thing we want to do is move a bridge from Infoworks to Revit.

00:14

We'll find the Civil Structures add on which is a very important step.

00:17

Then we'll export the bridge from InfraWorks to an IMX file.

00:22

Then we'll map and import a bridge right into Revit.

00:26

Next, we look at the Revit setup and rebar placement.

00:29

Setting up levels and views in Revit is very important.

00:32

Then we can add pier reinforcing.

00:35

We can configure the visibility graphics to make sure your rebar is displaying the way you want.

00:40

Then we'll jump down into documenting and scheduling bridge components,

00:43

which includes tagging bridge elements, creating a pier schedule, creating a pier foundation schedule.

00:50

Lastly, we're going to schedule that rebar.

00:52

We're going to create a rebar length schedule.

00:55

We're going to create a partition schedule, then we'll finally export our schedules to Excel, then we're done.