Quiz

A text box to place drawing notes for a sheet metal part.

A table to list the sheet metal material and thickness.

List bend ID, direction, angle, and radius.

A table to list the part number and description of the part.

Component properties in the design.

Manually entered into the table.

Auto-generated in the drawing.

Body properties in the design.

Edit the component properties and remove part number and description.

Click the eye icon next to the component in the browser.

Click the check box next to the component in the browser.

Rename the component “Empty” so it is omitted from views and parts lists.

Determines what model type will be represented in the drawing view such as an assembly or animation.

Determines the types of views that are created such as TOP, FRONT, RIGHT.

Sets the automated center marks and center lines for any views created.

Sets the edge visibility properties for any views created.

Assembly.

Animation storyboard.

Drawing parent view.

Sheet metal flat pattern.

The dimension is ½ of the actual value.

There are 2 identical features on the part.

The drawing view is a 2:1 scale.

The dimension is 2x the actual value.

To add additional geometry criteria to a selection in reference to datums and tolerances.

To identify required surface finishes on a part.

To add additional notes about the design using text.

To add a datum identifier to a specified location.

Seam gaps.

Cut edges.

Bend lines.

Material extent.

A rendered image of a drawing view.

A view that contains part information such as mass.

A view that shows cosmetic threads.

A zoomed in view of a small section of a drawing view.

Text.

Decal.

Border.

Attribute.