What is the purpose of defining a fixture in a CAM setup?

(Select one)

Fixtures are used for collision checking during simulation.
Fixtures are used for visual reference only.
Fixtures are used to automatically calculate depth of cut.
Fixtures are exported in G code for machine setup.

Select an answer

Where can information about the physical material be found for a design in Fusion 360?

(Select one)

Inspect > Measure.
Body Properties.
Utilities > Appearance.
File > Share.

Select an answer

How does a 3D Flow toolpath define the distance between each pass of the tool?

(Select one)

Stepover defined in the tool parameters.
Cusp Height based on the tool.
Number of Stepovers based on the selected faces.
Maximum Stepdown.

Select an answer

What information can be gathered from the line of code “N50 G1 X0.4762 Y0.2284 F650”?

(Select one)

The tool number is 50.
The tool is moving vertically.
The coordinate system reference is G1.
The federate is 650.

Select an answer

In general, what is the preferred approach when using a 3D Adaptive toolpath to rough a part?

(Select one)

Large step up and a large stepdown.
Large step up and a fine stepdown.
Fine stepdown and a fine step up.
Large stepdown and a fine step up.

Select an answer

Which tool is needed to plan the amount an endmill should protrude form a tool holder while machining a part to avoid a collision?

(Select one)

Interference.
Measure.
Accessibility Analysis.
Minimum Radius Analysis.

Select an answer

A part being machined has a large cusp left on a sloped face when using a 3D Contour toolpath. What change can be made to reduce the cusp height?

(Select one)

Change the cut direction.
Select a larger ball endmill.
Repeat the finish pass.
Select a smaller ball endmill.

Select an answer

What is the detection strategy used for a 3D Flat toolpath?

(Select one)

Perpendicular to the setup fixture.
Parallel to the tool orientation.
Perpendicular to the tool orientation.
Parallel to the setup fixture.

Select an answer

Which toolpath is typically used to remove material from internal fillets at the base of features?

(Select one)

Spiral.
Scallop.
3D Contour.
Pencil.

Select an answer

How can a CNC programmer efficiently create preset feeds and speeds for multiple materials when creating a digital representation of a ½” Flat Endmill?

(Select one)

Create a CAM expression to pull feeds and speed data from the machine control.
Create a tool library for each material with copies of each tool.
Define the tool material as Unspecified so the user is prompted each use.
Define Cutting Data for each material in the tools definition.

Select an answer

When using a Parallel milling strategy, which direction are the toolpaths created parallel to?

(Select one)

The XZ Plane.
The XY Plane.
The part boundary.
The YZ Plane.

Select an answer

What geometry selection is required to set up a 3D Adaptive toolpath?

(Select one)

You must select the faces to machine.
You must select the stock boundary.
3D Adaptive automatically uses Stock Contours so no selection is required.
You must select a machining boundary sketch or contour.

Select an answer

Which strategy is used to rough a part with a large endmill and semi-rough a part with a smaller endmill?

(Select one)

Flat Area Detection.
Rest Machining.
Conventional Milling.
Repeat Finish Pass.

Select an answer

If a Parallel toolpath wraps over the edge of a part down to the bottom cutting plane, which option should be deselected?

(Select one)

Model.
Contact Point Boundaries.
Slope.
Tool Orientation.

Select an answer

How does a 3D Scallop toolpath define the distance between each pass of the tool?

(Select one)

Cusp Height.
Stepover.
Number of Passes.
Defined Center Point.

Select an answer

Which 3D Adaptive parameter is responsible for how much material the tool engages with radially on each pass?

(Select one)

Fine Stepdown.
Stock to Leave.
Direction.
Optimal Load.

Select an answer

For a design that contains 45 degree chamfers, which slope angle range should be used to machine only chamfered faces of the design?

(Select one)

45-90.
44-46.
30-60.
0-45.

Select an answer

Which feature allows a setup to specify a view orientation and object visibility?

(Select one)

Camera Settings.
Setup Sheet.
Associated Named View.
NC Program.

Select an answer

Which tool can move one component to another component based on face selections?

(Select one)

Offset Face.
Press Pull.
Move/Copy.
Align.

Select an answer

How can a toolpath be left inside a setup but not used to calculate stock or be posted in G-code?

(Select one)

Protect.
Derive.
Optional.
Suppress.

Select an answer

Start your final test

Exam

What is the purpose of defining a fixture in a CAM setup?

Where can information about the physical material be found for a design in Fusion 360?

How does a 3D Flow toolpath define the distance between each pass of the tool?

What information can be gathered from the line of code “N50 G1 X0.4762 Y0.2284 F650”?

In general, what is the preferred approach when using a 3D Adaptive toolpath to rough a part?

Which tool is needed to plan the amount an endmill should protrude form a tool holder while machining a part to avoid a collision?

A part being machined has a large cusp left on a sloped face when using a 3D Contour toolpath. What change can be made to reduce the cusp height?

What is the detection strategy used for a 3D Flat toolpath?

Which toolpath is typically used to remove material from internal fillets at the base of features?

How can a CNC programmer efficiently create preset feeds and speeds for multiple materials when creating a digital representation of a ½” Flat Endmill?

When using a Parallel milling strategy, which direction are the toolpaths created parallel to?

What geometry selection is required to set up a 3D Adaptive toolpath?

Which strategy is used to rough a part with a large endmill and semi-rough a part with a smaller endmill?

If a Parallel toolpath wraps over the edge of a part down to the bottom cutting plane, which option should be deselected?

How does a 3D Scallop toolpath define the distance between each pass of the tool?

Which 3D Adaptive parameter is responsible for how much material the tool engages with radially on each pass?

For a design that contains 45 degree chamfers, which slope angle range should be used to machine only chamfered faces of the design?

Which feature allows a setup to specify a view orientation and object visibility?

Which tool can move one component to another component based on face selections?

How can a toolpath be left inside a setup but not used to calculate stock or be posted in G-code?