What happens to a derived body when edits are made to the parent design? Select two.

Select up to undefined

The link to the derive body is automatically broken.
Design updates are pushed to the derive after updating the version reference.
Design updates are pushed to the derive automatically.
Design updates are pushed to the derive during save.

Select an answer

Which workflow can be used to create a unique copy of a component?

(Select one)

Mirror
Move/Copy
Copy > Paste
Copy > Paste New

Select an answer

When importing a neutral CAD file such as a .STEP what must be activated in order to capture mechanical motion with joints?

(Select one)

Joint Origin
Component Color Cycling
Rigid Groups
Capture Design History

Select an answer

Which tool will restrict a joints motion to predefined values?

(Select one)

Edit Joint Limits
Activate Joint
Motion Study
Animate Joint

Select an answer

Tools in the Fusion 360 sample library are:

(Select one)

Require modifications
For demo purposes only
Not accurate
Read only

Select an answer

What length is the preferred amount of a tool’s projection from the holder?

(Select one)

No less than 1 inch.
10 times the diameter of the tool.
The least amount possible.
2 times the flute length.

Select an answer

When using a 3D adaptive clearing operation what best describes its method of material removal?

(Select one)

Large step downs to removal large amounts of material.
Large step downs with small step-ups to match complex geometry.
Small step downs with large step overs to removal large amounts of material.
Small step downs to match complex geometry.

Select an answer

Which of the following is a valid way to define a 2D contour?

(Select one)

Selected edge
Stock contour
Silhouette
Containment boundary

Select an answer

Which of the following is the best use case for a 3D contour toolpath?

(Select one)

A cylindrical bore with a step.
An open pocket with vertical walls.
A planar face on the top of a part.
Near vertical walls that can be machined with a consistent Z step.

Select an answer

Which geometry option can be used to focus a 3D scallop toolpath on a single filleted edge with varying Z coordinates?

(Select one)

Silhouette Selection
Tool Orientation
Keep Down Distance
Avoid/Touch Surface

Select an answer

Which toolpath parameters controls the tool contact points on a 3D pencils toolpath?

(Select one)

Number of passes
Bitangency angle
Stock to Leave
Limit number of stepovers

Select an answer

What is the purpose of a derived toolpath?

(Select one)

To apply selections and common parameters to a new toolpath type.
To create a template of the selected toolpath.
To create an exact copy of the selected toolpath.
To export the toolpath to a new setup.

Select an answer

Where can a toolpath template be used?

(Select one)

In any design.
In any setup in the current design.
Only on the current design in a new setup.
Only in the current setup.

Select an answer

Which of the following is a CAM expression that sets the maximum step over based on 20% of the tool diameter?

(Select one)

tool_fluteLength * 0.20
tool_diameter * 0.20
tool_stepdown * 0.20
tool_stepover * 0.20

Select an answer

If your program contains a pattern of operations and you want to post copies of all operations to different coordinate system locations on your machine in the same NC file, how would you set this up?

(Select one)

Post the operations multiple times at different WCS locations and manually combine the code in the NC file.
Create an NC program and manually enter the WCS offsets.
Create a linear pattern of all operations and override WCS.
Use Multiple WCS offsets in the setup.

Select an answer

Before a tool can be created and stored in the cloud, which of the following must you do first?

(Select one)

Close and re-open Fusion 360.
Save the file you’re working with.
Switch to the Design workspace.
Enable Cloud Libraries in user preferences.

Select an answer

When defining stock in a new Setup, Fusion 360 creates default stock dimensions that are:

(Select one)

Dependent on the file size.
Based only on the size of any fixturing that has been modeled.
Based only on a single component.
Large enough to enclose all of the bodies and components in the design.

Select an answer

Which operational state can tag a toolpath and allow a machine operator to skip it during machining?

(Select one)

Optional
Protect
Suppress
Derive

Select an answer

When selecting a 3D edge for a 2D contour operation how does Fusion 360 translate the selection?

(Select one)

It creates the chain at the highest Z coordinate of the selection.
It creates the chain at the Z coordinate at the middle of the selection.
It prompts the user to select the Z coordinate height of the chain.
It creates the chain at the lowest Z coordinate of the selection.

Select an answer

How can operations be reorganized in the browser?

(Select one)

Place an insertion marker and use Move/Copy.
Drag and drop them into the new location.
Create a copy of the operation and delete the original.
Delete all the operations and create them in the proper order.

Select an answer

Which two choices are available to you when using the Derive command? Select two.

Select up to undefined

Break Link
Create New Design
Add to Existing Design
Insert into assembly

Select an answer

One important advantage of creating a distributed design is:

(Select one)

Being able to work in offline mode.
Bringing in geometry from other designs to be re-used for creating new features.
Minimizing the number of files.
Shortening the time it takes to open a file.

Select an answer

Where can the NC Program command be found?

(Select one)

In the Setup dropdown menu.
In the Multi-Axis dropdown menu.
In the 2D dropdown menu.
In the Actions dropdown menu.

Select an answer

In order to post process more than one CAM Setup at the same time, it is necessary to make sure that which parameter value is different for each setup?

(Select one)

Program Name/Number
WCS Offset
Program Comment
Stock Offset Mode

Select an answer

In Fusion 360 which option allows you to view stock removed after each operation without simulating?

(Select one)

Associated named view
Component color cycling
In process stock
Manual NC

Select an answer

Where are setup sheets saved when created from an NC Program?

(Select one)

In the Data Panel as its own file.
Setup sheets aren’t saved, they constantly update with the design.
On your local hard drive.
Internal to the design.

Select an answer

Which CAM Expression would be used to find the max holes size during drilling operation geometry selection that is based on no more than 10% larger than the drill bit?

(Select one)

tool_diameter * 1.1
tool_diameter / 0.1
tool_diameter * 0.1
tool_diameter / 1.1

Select an answer

How can sample tools be used to populate a new tool library?

(Select one)

Create a copy in the sample library and drag it into your new library.
Copy and paste them into the new tool library.
Copy the tool information to the clipboard and create a new tool with those values.
They are automatically added when they are used in a toolpath.

Select an answer

Which direct modeling tool behaves differently depending on whether you’re in the solid tool set or surface tool set.

(Select one)

Move/Copy
Press Pull
Replace Face
Delete

Select an answer

In a new setup what does defining a fixture do for you?

(Select one)

Provides a visual reference only during toolpath creation.
Provides collision checking during simulation.
Provides collision avoidance during toolpath creation.
Provides simulation data to support fixture strength.

Select an answer

Start your final test

CAM Strategies For 3 Axis Milling final test

What happens to a derived body when edits are made to the parent design? Select two.

Which workflow can be used to create a unique copy of a component?

When importing a neutral CAD file such as a .STEP what must be activated in order to capture mechanical motion with joints?

Which tool will restrict a joints motion to predefined values?

Tools in the Fusion 360 sample library are:

What length is the preferred amount of a tool’s projection from the holder?

When using a 3D adaptive clearing operation what best describes its method of material removal?

Which of the following is a valid way to define a 2D contour?

Which of the following is the best use case for a 3D contour toolpath?

Which geometry option can be used to focus a 3D scallop toolpath on a single filleted edge with varying Z coordinates?

Which toolpath parameters controls the tool contact points on a 3D pencils toolpath?

What is the purpose of a derived toolpath?

Where can a toolpath template be used?

Which of the following is a CAM expression that sets the maximum step over based on 20% of the tool diameter?

If your program contains a pattern of operations and you want to post copies of all operations to different coordinate system locations on your machine in the same NC file, how would you set this up?

Before a tool can be created and stored in the cloud, which of the following must you do first?

When defining stock in a new Setup, Fusion 360 creates default stock dimensions that are:

Which operational state can tag a toolpath and allow a machine operator to skip it during machining?

When selecting a 3D edge for a 2D contour operation how does Fusion 360 translate the selection?

How can operations be reorganized in the browser?

Which two choices are available to you when using the Derive command? Select two.

One important advantage of creating a distributed design is:

Where can the NC Program command be found?

In order to post process more than one CAM Setup at the same time, it is necessary to make sure that which parameter value is different for each setup?

In Fusion 360 which option allows you to view stock removed after each operation without simulating?

Where are setup sheets saved when created from an NC Program?

Which CAM Expression would be used to find the max holes size during drilling operation geometry selection that is based on no more than 10% larger than the drill bit?

How can sample tools be used to populate a new tool library?

Which direct modeling tool behaves differently depending on whether you’re in the solid tool set or surface tool set.

In a new setup what does defining a fixture do for you?