Start your final test

Ready to test your knowledge? Pass this required test with a score of 75% or more to complete the course and earn a certificate of completion.  

You'll earn a certificate of completion each time you pass a skill-builder course. Find your recognitions on My Dashboard.

Required for course completion

12 questions

The Z axis on the CNC machine translates to which type of movement on a traditional vertical machining center?

(Select one)
Select an answer

When using adaptive toolpaths, what action might be necessary to ensure that all features are roughed out as thoroughly as possible?

(Select one)
Select an answer

How does adjusting the Feed per Revolution parameter affect a drilled hole?

(Select one)
Select an answer

Identify the correct order of operations for creating a threaded hole.

(Select one)
Select an answer

What hole creation technique is best used with the Drilling toolpath, as opposed to the Circular and Bore toolpath?

(Select one)
Select an answer

What is the purpose of rounding up stock sizes to dimensions compatible with fractional ruler measurements?

(Select one)
Select an answer

What extra consideration should be made for tapping of holes in a CNC machine when compared to drilled holes?

(Select one)
Select an answer

How are Parallel finishing operations performed?

(Select one)
Select an answer

Which aspect of the Flow toolpath is affected by the Stepover value?

(Select one)
Select an answer

Where are post processors for most major machines found in Fusion 360?

(Select one)
Select an answer

Which toolpath allows chamfers to be produced on a part?

(Select one)
Select an answer

What components need to be set with appropriate RPM, feed rate, and depth of cut for the CNC machine?

(Select one)
Select an answer

12/12 questions left unanswered

Was this information helpful?