Construction for BIM for MEP systems

00:03

When implementing BIM for MEP systems, construction is the fifth phase,

00:08

in which the MEP design model is converted into a constructible model, to ensure accuracy and buildability in the field.

00:16

After reviewing the technical design, the MEP design model is converted into fabrication components.

00:23

This requires developing installation and shop documentation,

00:27

which includes submitting RFIs, specification reviews, takeoff and cost management operations, and issue management.

00:37

Once documentation is established, onsite coordination and variation can begin.

00:43

Using Autodesk Build, team members can coordinate meetings and program scheduling,

00:49

conduct model updates and RFI management, update documentation, and track assets.

00:56

Then, using the Issues for Revit plug-in and the Coordination plug-in for Navisworks,

01:02

users can review construction model buildability, raise and address issues as required,

01:08

and update the project model and drawings as needed.

01:11

To further reduce errors in construction, accurate layout information can be acquired using Autodesk Point Layout,

01:18

an add-in for both Revit and Navisworks.

01:21

Point Layout automates the addition of setting out points to building elements, streamlining on-site positioning.

01:29

Points can be assigned to all elements, but they have significant value in complex areas, such as beneath slabs,

01:36

where manual measurements are challenging and prone to error.

01:40

These points can then be exported and used on-site with total stations for precise installation.

01:47

By integrating fabrication modeling with automated point layout, teams ensure a smooth transition from design to construction,

01:55

enhancing both efficiency and accuracy on-site, and ensuring a coordinated fabrication model ready for site execution.