Success Plan: Subtractive Manufacturing Maturity 2

Explore milling in FeatureCAM, with a core focus on the workflow of programming milling parts in FeatureCAM.

Prerequisites

This content series requires user-level knowledge of Fusion and is focused on best practices and its industry applications. If you don't have experiences with this product, we recommend you to take foundational training using one of the resources below:

• Built-in tutorials, available via in-product Help
• Authorized Training Centers

About the author

This content series was created by Kelbie Ockey.

Before you start

• Please make sure you have the FeatureCAM software loaded.
• If you have technical difficulties, please reach out to product support.

• FeatureCAM Workflow
• Lesson 1 - Open, Stock, Machining Prep
• Lesson 1 - Create Features
• Lesson 1 - Simulate, Revise
• Lesson 1 - NC Code
• Lesson 2 - Import, Stock, Machining Prep
• Lesson 2 - Create Features
• Lesson 2 - Simulate, Revise
• Lesson 2 - NC Code
• Lesson 3 - Import, Stock, Machining Prep
• Lesson 3 - Create Features
• Lesson 3 - Simulate, Revise
• Lesson 3 - NC Code
• FeatureCAM Getting Started Standard: Milling - Quiz
• Learn More or Get Help on This Topic

Explore turning in FeatureCAM, with a core focus on the workflow of programming turning parts in FeatureCAM.

Prerequisites

This content series requires user-level knowledge of Fusion and is focused on best practices and its industry applications. If you don't have experiences with this product, we recommend you to take foundational training using one of the resources below:

• Built-in tutorials, available via in-product Help
• Authorized Training Centers

About the author

This content series was created by Peter Champneys.

Before you start

• Please make sure you have the FeatureCAM software loaded.
• If you have technical difficulties, please reach out to product support.

• Introduction to the Workflow
• Lesson 1 - Import, Stock, Machining Prep
• Lesson 1 - Create Features
• Lesson 1 - Simulate, Revise
• Lesson 1 - NC Code
• Lesson 2 - Import, Setup, Machining Prep
• Lesson 2 - Create Features
• Lesson 2 - Simulate, Revise
• Lesson 2 - NC Code
• Lesson 3 - Import, Setup, Machining Prep
• Lesson 3 - Create Features
• Lesson 3 - Simulate, Revise
• Lesson 3 - NC Code
• FeatureCAM getting started: Turning - Quiz
• Learn More or Get Help on This Topic

If you have attempted to implement your Autodesk technology on your own and still have questions, working with your Autodesk partner would be the best next step. If you are not already working with an Autodesk Partner, find a partner today.

• Find a partner to help you identify the right topics