Create a rebar schedule and place it on a sheet in Revit.
Tutorial resources
These downloadable resources will be used to complete this tutorial:
Transcript
00:03
In Revit, you can create a rebar bending schedule and place it on a sheet.
00:08
On the View tab, in the Create panel, select Schedules > Schedule Quantities.
00:14
The New Schedule dialog opens.
00:17
Under Category, select Structural Rebar, and then click OK.
00:23
In the Schedule Properties dialog, you choose the data that you want to appear on your structural rebar schedule,
00:29
then order it to your preference.
00:31
To select the fields you want to appear on the schedule, from Available fields, click an option,
00:38
and then click the Add parameter(s) button to add it.
00:41
If you want to select multiple options, press the CTRL or SHIFT keys while making your selections.
00:47
If you want to change the order of Scheduled fields, use the Move up and Move down buttons.
00:52
Next, click the Sorting/Grouping tab.
00:56
To sort the information you need to include in your schedule, expand the Sort by drop-down and choose an option to sort by.
01:03
To add the sorting parameter value as a header or footer on your sheet, select either header or footer.
01:10
Be sure to also select Grand totals, and then expand the drop-down to choose how you want to view your information.
01:18
If you want to format a field, click the Formatting tab.
01:22
Select the field you want and make any selections you need to format this field.
01:27
Click OK.
01:29
Your rebar schedule appears.
01:31
To place the schedule on a sheet, in the Project Browser, right-click Sheets All and select New Sheet.
01:39
When you see the New Sheet dialog appear, click OK.
01:43
Finally, from the Project Browser, drag your new Rebar Schedule and drop it onto the new sheet.
01:49
If the schedule is too long for your sheet, you can click the break symbol on the right edge to break it into segments.
01:55
You can also widen the columns to ensure the headers fit.
00:03
In Revit, you can create a rebar bending schedule and place it on a sheet.
00:08
On the View tab, in the Create panel, select Schedules > Schedule Quantities.
00:14
The New Schedule dialog opens.
00:17
Under Category, select Structural Rebar, and then click OK.
00:23
In the Schedule Properties dialog, you choose the data that you want to appear on your structural rebar schedule,
00:29
then order it to your preference.
00:31
To select the fields you want to appear on the schedule, from Available fields, click an option,
00:38
and then click the Add parameter(s) button to add it.
00:41
If you want to select multiple options, press the CTRL or SHIFT keys while making your selections.
00:47
If you want to change the order of Scheduled fields, use the Move up and Move down buttons.
00:52
Next, click the Sorting/Grouping tab.
00:56
To sort the information you need to include in your schedule, expand the Sort by drop-down and choose an option to sort by.
01:03
To add the sorting parameter value as a header or footer on your sheet, select either header or footer.
01:10
Be sure to also select Grand totals, and then expand the drop-down to choose how you want to view your information.
01:18
If you want to format a field, click the Formatting tab.
01:22
Select the field you want and make any selections you need to format this field.
01:27
Click OK.
01:29
Your rebar schedule appears.
01:31
To place the schedule on a sheet, in the Project Browser, right-click Sheets All and select New Sheet.
01:39
When you see the New Sheet dialog appear, click OK.
01:43
Finally, from the Project Browser, drag your new Rebar Schedule and drop it onto the new sheet.
01:49
If the schedule is too long for your sheet, you can click the break symbol on the right edge to break it into segments.
01:55
You can also widen the columns to ensure the headers fit.
