Success Plan: Coordination for Architecture, Engineering, and Construction Maturity 1

After designing your drainage models, it is important to check for clashes between all known utility models. Catching and addressing clashes at the user level avoids the clashes at higher levels (discipline and company collaboration, for instance) reducing rework and meeting time. In this module, you will identify how to select the networks for interference checking. Next, you will define the criteria in which an interference happens. Lastly, you navigate to each interference.

This module takes approximately 10 minutes to complete. By the end of the module, you should be able to: 

• Select the pipe networks 
• Set the interference reporting criteria 
• Navigate and correct the interferences 

About the author

This module was created by Stacey Morykin.

Before you start

• Please make sure you have the Civil 3D software loaded.
• If you have technical difficulties, please reach out to product support. 

• Introduction
• Run an interference check
• Navigate and correct interferences
• Gravity pipe network interference check - Quiz
• Learn More or Get Help on This Topic

Using the Revit Interference Check tool, we can find clashes and fix them by running parallel pipes and connecting fittings to each other.

This module takes approximately 30 minutes to complete. By the end of the module, you should be able to:

• Work with Interference Checking
• Create and modify parallel pipes
• Change short runs of ducts so fitting connects to fitting

Before you start

• Please make sure you have the Revit software loaded.
• If you have technical difficulties, please reach out to product support. 

• Overview of working in tight spaces with duct and pipe in Revit
• Working with interference checking in Revit
• Creating and modifying parallel pipes in Revit
• Modifying ducts fitting to fitting in Revit
• Working in tight spaces with duct and pipe in Revit - Quiz
• Learn more or get help on this topic
• Let us know what you think